Station Alert 504 (SA504) Radio Connected Controller

This Version provides 12VDC Connections for each of the Four Outputs

The SA504 Controller is a plug-and-play Single-tone & 2-tone, or DTMF Decoder and controller Capable of working with most public safety base and mobile radios. The SA504 monitors dispatch traffic for matching tone sets; once matched tone sets are received, the SA504 will activate the 12vdc Outputs assigned to those tones. The SA504 can decode up to 16 sets of tones and activate four different 12vdc outputs. The Outputs can be connected to 12vdc devices such as different color lights, Bells, and other 12vdc notification devices. Each output can be assigned a maximum of 4 tone sets. Each output time is programmable from 1-255 seconds and has a delay on and cycle function. 

Two-Tone Decoding:

• Will Decode Single and Two-Tone Pages over Analog and P25 Phase I & II Modulation
• Programmable Tone Lenghts from 0.1 Second to 9.9 Seconds
• Detectable Tone Frequency From 260-3500hz
• Adjustable Bandwidth of 0.1% to 2.9%
• DTMF Decoder (You can not decode DTMF and Two-Tone at the same time)
• It can decode up to 16 sets of tones
• Up to 4 tone sets in 4 banks each bank activates 1 of the 12vdc outputs

Output Activations:

• Will Decode Single and Two-Tone Pages over Analog and P25 Phase I & II Modulation
• Programmable Tone Lenghts from 0.1 Second to 9.9 Seconds
• Detectable Tone Frequency From 260-3500hz
• Adjustable Bandwidth of 0.1% to 2.9%

Version Cable Notes:

• Harris CS7000 Cable Comes w/Line Level Audio Cable that can connect to an Audio Amplifier
• Harris 44-Pin Cable Comes w/Speaker Output Connection
• Motorola XTL/APX Cable Comes w/Speaker Output Connection

SA504 Programming Manual

The pictured Item Represents the Harris CS7000 Version.